피드백을 통해 제안을 제출하거나 온라인 고객 서비스에 문의할 수 있습니다. 신속하게 개선하겠습니다.:
지원
확인
??
지원되는 타사 쿠키 없음
귀하의 브라우저는 타사 쿠키 설정을 허용하지 않습니다. 브라우저 설정에서 활성화하거나 아래 버튼을 클릭하십시오.
새 탭에서 페이지 내용을 열려면 여기를 클릭하십시오.
열려 있는 페이지가 처음에 작동하지 않는 경우 페이지를 다시 로드해 보십시오.
파트커뮤니티가 작동하려면 브라우저에서 쿠키를 활성화하십시오.
카탈로그 탐색
언어선택:
Deutsch
English
español
français
italiano
русский
English
품질보증 정보
카탈로그: Thermokon
생성됨: 01.12.2020
카탈로그의 특징:
Central management with the CADENAS quality tool PARTproject QA
Electronic test run was passed (CAD compatibility assured)
Only clear nomenclature -> ERP-compatibility assured
Thermokon
662345 LK+ CO2 Temp RS485 Modbus
Thermokon
Duct Sensors
Climate & Air Quality
Powered by
CAD모델 다운로드
CAD 파일 생성
PDF 데이터시트 생성
미리보기
3D
2D
CAD모델 선택
{thermokon/duct_sensors/climate_air_quality/lk_plus.prj},{NB=662345 LK+ CO2 Temp RS485 Modbus (300)},{ARTNR=662345},{EL=180},{IDPIM3=5135},{BEZ=LK+ CO2 Temp RS485 Modbus},{GGEO=},{GEOV=},{REF3D=LK+ USE M},{BILD=lk_plus.png},{INFOWWW=link zur Website},{MESSG= Temperatur, CO2},{AT= Kanalfühler},{BF=0},{BE=0},{KONFIG= Thermokon App, uConfig, BUS, Jumper, DIP-Schalter},{S= NDIR (nicht dispersiv, infrarot)},{AGSPA= 2x 0..10 V oder 0..5 V, einstellbar über Jumper, live-zero-Konfiguration über App oder uConfig, min. Last 10 kΩ},{AGST=---},{AGSK=---},{EG=0},{NTECH= RS485 Modbus},{FTECH=0},{DUT=RS485 Modbus RTU, halbduplex, Baudrate 9.600, 19.200, 38.400 oder 57.600, Parität: keine (2 Stoppbits), gerade oder ungerade (1 Stoppbit)},{LOD=300}
기술적 기준에 따라 원하는 제품을 선택하십시오. 선택할 수 있는 속성은 테이블 아이콘으로 표시됩니다. 선택은 테이블의 아이콘이나 값에 따라 재설정 됩니다.
사용 가능한 제품: 86
HELP_VARIABLE
Company
Thermokon
Description
LK+ - Duct Sensor Air Quality
Bill of material
662345 LK+ CO2 Temp RS485 Modbus
BEZ
Naming
LK+ CO2 Temp RS485 Modbus
LK+ CO2 Temp RS485 Modbus
ARTNR
Article Number
662345
662345
LOD
Level of Detail
300
200
300
200
BILD
Picture
INFOWWW
link to website
link to website
MESSG
Measured values
temperature, CO2
temperature, CO2
AT
Application/type
Duct sensor
KONFIG
Configuration
Thermokon app, uConfig, BUS, jumper, DIP switches
Thermokon app, uConfig, BUS, jumper, DIP switches
S
Sensor
NDIR (non-dispersive, infrared)
NDIR (non-dispersive, infrared)
AGSPA
Output voltage
2x 0..10 V or 0..5 V, adjustable via jumper, live-zero configuration via app or uConfig, min. load 10 kΩ
2x 0..10 V or 0..5 V, adjustable via jumper, live-zero configuration via app or uConfig, min. load 10 kΩ
AGST
Output current
---
---
AGSK
Output switching contact
---
---
NTECH
Network technology
RS485 Modbus
RS485 Modbus
DUT
Data transmission
RTU, half-duplex, baud rate 9.600, 19.200, 38.400 or 57.600, parity: none (2 stop bits), even or odd (1 stop bit)
RTU, half-duplex, baud rate 9.600, 19.200, 38.400 or 57.600, parity: none (2 stop bits), even or odd (1 stop bit)
TEB
Operating range temperature
0 - +50
GKT
Accuracy temperature
±0,5 K (typ. at 21 °C), within default measuring range, offset setting via app or uConfig
±0,5 K (typ. at 21 °C), within default measuring range, offset setting via app or uConfig
AST
Output signal temperature
scaling analogue output, 0..+50 °C (default setting), selectable from 4 temperature ranges -40..+60 | 0..+50 | -20..+80 | -15..+35 °C, optionally configurable
scaling analogue output, 0..+50 °C (default setting), selectable from 4 temperature ranges -40..+60 | 0..+50 | -20..+80 | -15..+35 °C, optionally configurable
EBF
Operating range humidity
max. 85% rH short term condensation
MBF
Measuring range humidity
---
---
GKF
Accuracy humidity
---
---
MBCO2
Measuring range CO2
0..2000, 0..5000, optionally configurable
0..2000, 0..5000, optionally configurable
GKCO2
Accuracy CO2
±50 ppm +3% of measured value (typ. at 21 °C, 50% rH, 1015 hPa), self-calibration Dual Channel
±50 ppm +3% of measured value (typ. at 21 °C, 50% rH, 1015 hPa), self-calibration Dual Channel
MVOCM
Measuring VOC mixed gas
---
---
SPANN
Power supply
15..35 V = SELV, 19..29 V ~ SELV
15..35 V = SELV, 19..29 V ~ SELV
LA
Power consumption
max. 2,5 W (24 V =), 4,3 VA (24 V ~)
MBM
Material in touch with media
Pipe, Ø=19,5 mm, black, length 180 mm
Pipe, Ø=19,5 mm, black, length 180 mm
EL
Installation length
180
180
mm
AZ
Display
---
---
GEH
Enclosure
USE-M, impact- and shock-resistant enclosure with quick-release cover, PC
FARBE
Colour
pure white
pure white
SA
Protection IP
IP65, according to EN 60529
ANSCHLUSS
Connection
removable cable entry M25 with fourfold cable entry for wire with max. Ø=7 mm, removable plug-in terminal, max. 2,5 mm², BUS max. 1,5 mm²
removable cable entry M25 with fourfold cable entry for wire with max. Ø=7 mm, removable plug-in terminal, max. 2,5 mm², BUS max. 1,5 mm²
VP
Packaging
87 x 87 x 250
87 x 87 x 250
LIEFERUMFANG
Delivery content
incl. mounting flange, incl. mounting set (screws and accessories)