피드백을 통해 제안을 제출하거나 온라인 고객 서비스에 문의할 수 있습니다. 신속하게 개선하겠습니다.:
지원
확인
??
지원되는 타사 쿠키 없음
귀하의 브라우저는 타사 쿠키 설정을 허용하지 않습니다. 브라우저 설정에서 활성화하거나 아래 버튼을 클릭하십시오.
새 탭에서 페이지 내용을 열려면 여기를 클릭하십시오.
열려 있는 페이지가 처음에 작동하지 않는 경우 페이지를 다시 로드해 보십시오.
파트커뮤니티가 작동하려면 브라우저에서 쿠키를 활성화하십시오.
카탈로그 탐색
언어선택:
English
English
품질보증 정보
카탈로그: Mechanical Products
생성됨: 28.2.2020
카탈로그의 특징:
Central management with the CADENAS quality tool PARTproject QA
Electronic test run was passed (CAD compatibility assured)
Only clear nomenclature -> ERP-compatibility assured
Mechanical Products
1500-001-100-XX
Mechanical Products
15 Series
Powered by
CAD모델 다운로드
CAD 파일 생성
PDF 데이터시트 생성
미리보기
3D
2D
CAD모델 선택
{mechanicalproducts/15_series/15_series.prj},{NB=1500-001-100-XX},{SN=15},{MB=0},{B=0},{T=0},{AR2=10.0},{SD1=MP Series 15},{SD2=Push to Reset Circuit Breaker},{SD3=Series 15},{ATCI=atc_s15_3-20a.png},{TCI=tci_s15_5-40a.png},{OTTI=ott_s15_5-40a.png},{SER=Series 15},{VO=250VAC / 50VDC},{CB=100% Hold, 135% Trip},{SCI=Per UL1077 1,000A @ 250VAC 1,000A @ 50VDC 2,500A @ 32VDC},{AA=UL/cUL, CSA, VDE (IEC), CCC, UL1077},{MR=UL OL1},{IP=UL1500},{IS=ABYC-E11},{VD=0.25V},{VIB=8g},{SHK=30g},{COR=96hr Salt Spray},{HUM=},{ARVIS=10}
기술적 기준에 따라 원하는 제품을 선택하십시오. 선택할 수 있는 속성은 테이블 아이콘으로 표시됩니다. 선택은 테이블의 아이콘이나 값에 따라 재설정 됩니다.
사용 가능한 제품: 14
HELP_VARIABLE
Company
Mechanical Products
Description
MP Series 15 - Thermal Circuit Breaker
Bill of material
1500-001-100-XX
PN
Part Number
1500-001-100-XX
1500-001-100-XX
MB
Mounting Bushing
7/16"-28 thread, Two bushing flats perpendicular to case thickness (a)
15/32"-32 thread - Shouldered with two flats perpendicular to the case thickness (b)
Snap-in bushing - "Press" mark parallel to case thickness and opposite terminals (c)
3/8"-27 threaded nylon - one flat parallel to case thickness and opposite terminals (d)
7/16"-28 thread, Two bushing flats perpendicular to case thickness (a)
15/32"-32 thread - Shouldered with two flats perpendicular to the case thickness (b)
Snap-in bushing - "Press" mark parallel to case thickness and opposite terminals (c)
3/8"-27 threaded nylon - one flat parallel to case thickness and opposite terminals (d)
B
Button
White - No amp stamp
White - Black parallel amp stamp (e)
White - Black perpendicular amp stamp (f)
Black - No amp stamp
Black - White parallel amp stamp (e)
Black - White perpendicular amp stamp (f)
Black - No amp stamp, white trip indicator
Black - White parallel amp stamp,white trip indicator (e)
Black - White perpendicular amp stamp, white trip indicator (f)
White - No amp stamp
White - Black parallel amp stamp (e)
White - Black perpendicular amp stamp (f)
Black - No amp stamp
Black - White parallel amp stamp (e)
Black - White perpendicular amp stamp (f)
Black - No amp stamp, white trip indicator
Black - White parallel amp stamp,white trip indicator (e)
Black - White perpendicular amp stamp, white trip indicator (f)
T
Terminals
0 - Both terminals quick connect, straight (a)
1 - Both terminals quick connect, bent at 90° (b)
2 - Both terminals w/#6-32 threads, bent at 90° (c)
3 - Both terminals w/#8-32 threads, bent at 90° (c)
4 - One terminal quick connect straight and one terminal w/#6-32 threads, bent at 90° (d)
7 - Both terminals #8-32 threads, straight (g)
9 - Both terminals solder hole straight (a)
0 - Both terminals quick connect, straight (a)
1 - Both terminals quick connect, bent at 90° (b)
2 - Both terminals w/#6-32 threads, bent at 90° (c)
3 - Both terminals w/#8-32 threads, bent at 90° (c)
4 - One terminal quick connect straight and one terminal w/#6-32 threads, bent at 90° (d)
7 - Both terminals #8-32 threads, straight (g)
9 - Both terminals solder hole straight (a)
AR2
Amp Rating (A)
10.0
10.0
VO
Max Voltage Rating
250VAC / 50VDC
AA
Agency Approvals
UL/cUL, CSA, VDE (IEC), CCC, UL1077
IS
Industrial Standard
ABYC-E11
HN
Hardware Note
Contact Factory for Terminal and Mounting hardware
GENNOTE
General Note
Specifications subject to change